Ignition Repair & Replacement in Phoenix
If your key does not turn or gets stuck or fails to start the car, we’ll fix the problem for you using your own keys! Phoenix metropolitan area
It should be presumed that the key is not always the one causing the problems like failure to start the ignition cylinder or if the latter seems loose and unsteady. In most cases the worn out ignition cylinder is actually to blame. For this reason, we always identify the nature of the problem and suggest the proper solution. You’ll never be charged for a good cylinder!
Ignition cylinder failure symptoms
- Key fails to turn or turns after putting much effort into it.
- as to wiggle the key for successful starting.
- Key is stuck in the ignition cylinder and cannot be withdrawn out.
- Flashing dashboard lights will go on when trying to start the car.
- Engine is started inconsistently and everything is fine with the battery.
Find out more about the topic on our website.
Is it the key, or the ignition cylinder?
Symptoms of the worn ignition key and damaged ignition cylinder practically coincide. Thus, we need to check both items to see where the problem lies. In the case when the ignition key has been affected, we’ll make a new one. But once the wear and tear of ignition wafers makes the ignition cylinder fail to lock/unlock properly, a replacement becomes necessary.
In no circumstances should you try to pull out the key. As a result, you might end up having to solve a serious problem instead of a simple one, pulling the key from the cylinder is going to require a lot of time. In case your key has got stuck in the ignition cylinder, stop immediately and call us!
Should the ignition cylinder be repaired or replaced?
The ignition cylinder is either repaired or completely replaced by a brand-new one. In the second case, if applicable, we will make sure that the new cylinder matches your old key. There won’t be a need for two separate ignition cylinders for you anymore.
How we repair or replace your ignition cylinder on site:
- 1. Identify whether the key, cylinder or the nearby wiring system causes the problem.
- 2. Offer the best solution taking into account your case.
- 3. Repair or replace the cylinder directly at your premises.
- 4. Key up your ignition cylinder after replacement and check it repeatedly.
We provide mobile locksmith services including car key replacement, cutting and programming and ignition cylinder rekeying. Our service is available in Phoenix and throughout the Valley area, and we provide all of it at your doorsteps! Find out more details on Vortex Car Locksmith services.
Ignition repair FAQs
Is it my key or the ignition cylinder fault?
The symptoms are identical to a worn-out ignition switch, so we test both parts. Sometimes a sharp cut brand new key solves this problem much cheaper than replacing the cylinder.
My key is stuck in the ignition, can I force it?
No do not! it can result in the breaking off of the key inside the ignition cylinder, making the job harder, just contact us and we’ll have it fixed.
How can I tell if my car’s ignition cylinder is causing the problem??
Some of the most common symptoms are: a key that turns unevenly, difficulties in turning the key, blinking dashboard lights and sporadic non-starting despite a good battery.
Can I us my current key with a new ignition?
Most times, yes. After installing the cylinder, we will be able to key your existing key in most cases, and you do not have to carry two different keys.
Can you fix my car’s ignition wherever my car is located?
In case of vehicles that permit this kind of work, we will diagnose and fix or replace the cylinder on the spot, starting the engine multiple times.